What Is The Weight Of The Frame?
The size 3 frame weighs approx 1290g and the fork 400g, both fully painted and finished, including hardware.
The size 3 frame weighs approx 1290g and the fork 400g, both fully painted and finished, including hardware.
On and On can take up to 45c tyres or 35c with a mudguard. This does depend on tyre/rim combination as it can vary between manufacturers.
The bike has been tested to a maximum total weight limit of 110kg. If you are near the upper end of this limit we would recommend regular checking on your spoke tension and wheelset.
The frame is designed around the T47 bottom bracket standard. In particular this is an Outboard T47 Bottom Bracket
Yes you can fit full length mudguards to the On and On
Seatpost frame clamp - 12Nm. Thru Axles - 12Nm. Stem clamp - 6Nm
We use the ISO4210 standard as a basis for all of our frames, then we also carry out tests above and beyond this test in certain areas.
The following small parts are proprietary and we hold spares of these in case of damage or loss. Please contact us if you require any of these parts. Derailleur hangers, cable guides, seat clamp, seatclamp cover, headset top cap, headset spacers.
Yes, there are mounting points on the fork blades alongside top tube mounts for a pack, pannier rack mounts and under downtube mounts for a storage bottle. The fork blades can take a maximum 5kg per leg, and rear pannier mounts max 10kg.
The Di2 battery can be inserted into the seatpost using the custom battery holder which is supplied with the frame.
Unfortunately this isn't something we currently offer on any of our framesets.
We only use Ceramic Speed SLT bearings in our headsets which come with a lifetime warranty.